Utilization of porous ceramic bodies for functional wall and floor tiles . By using raw materials that can decompose a large amount of gas at high temperature and adding an appropriate amount of chemical foaming agent, a porous ceramic body with a bulk density of only 0.6-1.0g/cm3, or even lower, is made. This kind of ceramic material that is lighter than water has multiple uses.
A. Thermal insulation energy-saving bricks. The surface of the green body is glazed, which has the effect of heat preservation and energy saving, and is also easy to clean. The non-glazed thermal insulation and energy-saving bricks have rough surface, which is simple and elegant, and has the effect of returning to the past.
B. Sound-absorbing products. The blank body is as high as 40%-50%, which can reduce the sound, and has the function of fire prevention and heat preservation. In the indoor sound design, the use of sound-absorbing products can obtain the effect.
C. Lightweight roof tiles. It is made into roof tiles, which can reduce the load-bearing capacity of the house. Water-permeable pavement bricks form a porous and coherent pore structure in the bricks, which can penetrate ground water into the ground. It has the style of ordinary square bricks, and has the functions of water permeability, water retention and anti-skid. It is a substitute for square bricks at present.
Antistatic bricks. People generate static electricity in their daily work activities. Static electricity is very harmful in the computer room where the precision instruments are placed, and in the warehouse where flammable and explosive materials are stored. For this reason, antistatic bricks are used. . Antistatic bricks are usually made by adding semiconducting metal oxides to the glaze or blank to make the bricks with semiconducting properties, avoid the accumulation of static electricity, and achieve the purpose of antistatic.
New type of wall and floor tiles
Microcrystalline glass tiles. The stratum of the brick is made of ceramic materials, the surface layer is made of glass-ceramics, and the forming adopts secondary cloth technology and is fired in a roller kiln. The production cost is reduced, and the problem of inconvenience in paving the glass-ceramics is solved.
Polished crystal tiles, also known as polished glazed tiles and glazed polished tiles, are made by firing and polishing a layer of wear-resistant transparent glaze about 1.5mm thick after firing on the surface of the green body. It has the characteristics of rich decoration of colorful glazed tiles, low water absorption rate of porcelain, and good material performance. It also overcomes the disadvantages of non-abrasion resistance, poor chemical corrosion resistance and simple decorative methods of porcelain tiles. Polished crystal tiles are decorated with under-glaze, high-temperature firing, and have a delicate, noble and gorgeous glaze. They are high-end products.
The above information is fiber cement boardLeader goldenpower Company introduces the relevant information about the new varieties of ceramic wall and floor tiles. The article comes from goldenpower Group http://www.goldenpowerjc.com/. Please indicate the source for reprinting.